Brick force Heavy Duty 150 mm × 15 m × 2.4 mm – Strong Reinforcement for Solid Brick Walls
The **Brick force Heavy Duty 150 mm × 15 m × 2.4 mm** roll is a galvanized steel reinforcement strip designed to strengthen brick or block wall construction. With a height of 150 mm, wire gauge of 2.4 mm, and length of 15 m, this Brick force specification is ideal for ensuring brick walls maintain bond, distribute loads, resist cracking, and meet building code or SABS standard reinforcement requirements. Available at Leroy Merlin under their Heavy Duty Wire Fencing / Brick force
Key Specifications.
Brick force Heavy Duty 150 mm
- Roll Size / Dimensions: 150 mm height × 15 m length.
- Wire Gauge / Thickness: 2.4 mm heavy-duty galvanized steel wire.
- Material Finish: Galvanized steel — provides rust protection and durability in harsh weather or mortar exposed conditions.
- Weight & Packaging: (Approx.) ~3 kg per roll — packed compact for transport. (Local supplier lists 150×15m 2.4mm HD roll as about 3 kg)
- Standards / Quality: Heavy-duty rated, often used in compliance with SABS or equivalent construction safety and reinforcement standards.
Why Use Brick force 150 mm × 15 m (2.4 mm)?
- Load Distribution & Crack Prevention: Reinforces mortar joints, transfers stress across wall surfaces and helps prevent cracking along vertical joints.
- Stronger Wall Bonding: Acts as a horizontal bonding element, especially in multi-story or high wind areas.
- Corrosion Resistance: Galvanized finish ensures longer life-span in damp or exposed conditions.
- Meets Heavy-Duty Requirements: Suitable for structural and load-bearing walls, especially in heavy construction or exposed facades.
Applications & Use Cases.
Brick force Heavy Duty 150 mm
- Brick wall lintels and openings — supports over doors/windows to prevent sagging.
- Pointing & expansion joint reinforcement, especially in longer runs of wall to prevent thermal/settlement cracks.
- Garden and boundary walls that are exposed to wind and moisture.
- Use in reclaimed or mixed material walls to help even out load distribution.
Installation & Best Practices.
Brick force Heavy Duty 150 mm
- Install the Brick force in the mortar bed between every second or third course of bricks (as per structural requirements).
- Ensure correct embedment — it must be fully bedded in fresh mortar and not left exposed. Mortar bedding should cover the full height of the Brick force.
- Overlap ends by at least 150mm if more than one roll is used in a run.
- Protect cut ends from corrosion—galvanized finish helps but exposed steel should be back-filled with mortar.
- Clean off mortar droppings or excess water to avoid corrosion pits or weak spots.
Advantages vs Alternatives.
Brick force Heavy Duty 150 mm
- Thicker gauge (2.4 mm) offers better resistance to bending or deformation compared to light duty (1.6-1.8 mm) Brick force variants.
- Heavier roll (150 mm) gives more coverage per course vs narrow ones (50mm, 75mm) and is more effective in binding across larger brick formats.
- Galvanized finish outperforms plain steel in environments with moisture or exposure.
- Cost-effective — a simple steel roll that adds structural benefit without needing complex reinforcements or special meshes.
What to Check / Limitations.
Brick force Heavy Duty 150 mm
- If walls are extremely exposed (near seashore, high humidity), additional corrosion protection might be needed beyond galvanization.
- May appear slightly heavy for thin/skin faced applications; support & bonding must be correct.
- Handling and cutting – 2.4 mm wire requires gloves and proper tools to cut cleanly. Sharp edges could injure or damage brick edges.
- Ensure compatibility with your mortar mix and brick size; large bricks or hollow bricks may need different reinforcement schedules.
Summary – Solid Reinforcement You Can Rely On.
Brick force Heavy Duty 150 mm
The **Brick force 150 mm × 15 m × 2.4 mm Heavy Duty** roll gives masonry builders a strong, dependable form of reinforcement. With its height, thickness, and galvanized protection, it supports structural integrity in brickwork, reduces cracking, improves load distribution, and maintains compliance with construction standards. For walls, boundary walls, lintels and general brickwork, this is a go-to option for quality and durability. Order Here
